Knowledge Base:  
Knowledge Base > Timber Bass & Fluke SB Support

Page of 1
Bass Strap Removal Instructions
Disconnect the strap from the output jack strap button. Grasp the loop side of the Kevlar where it wraps around the leather strap and start pushing the leather strap through the Kevlar loop. Pass
MiSi Charging and Plugging In
To charge the acoustic trio pickup, plug the Power Charger into a 120/220 V AC outlet.Then plug the power charger 1/4" stereo plug into the pickup's endpin jack and wait 60 seconds. Now your picku
Timber Bass Preamp Battery Replacement
The active preamp runs on two 3V coin cells contained in the battery enclosure on the side of the body. Open the drawer by pinching the two tabs and pulling out. Note polarity indicated on the bat