Knowledge Base:  
Tuning Pegs
Last Updated: 02/18/2022
Standard friction tuners will need periodic tightening to maintain
tightness as the seasons change and the wood dries. Using a Phillips
screwdriver at the end of each tuner, tighten until the tuner begins to
get difficult to turn. Tightness of the Peghed geared tuners can be
adjusted by pressing in while the peg is rotated to tighten or pulling
out to loosen. An E string fine tuner is only included with friction
pegs.

Was this article helpful?

Comments:
 

Related Articles
 > Violin Bridge Setup
 > Violin Tuning is GDAE
 > Chin and Shoulder Rest
 > Rosining a New Bow