Knowledge Base:  
MiSi Charging and Plugging In
Last Updated: 02/18/2022
To charge the acoustic trio pickup, plug the Power Charger into a 120/220 V AC outlet.Then plug the power charger 1/4" stereo plug into the pickup's endpin jack and wait 60 seconds. Now your pickup is ready for 16 hours of performance time (actual playing time may vary depending on playing style). For best performance increase the charging time up to 120 seconds for the initial 2-3 charging cycles.

You can plug your instrument into ANY input of ANY system or amplifier regardless of input impedance. In the same manner, you can use any type of shielded MONO cable - regardless of its capacity. Your sound will not be altered. You can enjoy the benefits of an active amplified system without worrying about batteries.



Was this article helpful?

Comments:
 

Related Articles
 > Timber Bass Preamp Battery Replacement
 > Bass Strap Removal Instructions